Brand: Apollo
Country of Origin: Taiwan
Country of Manufacturing: Taiwan
Model: 3P20K
Type: Online
Capacity: 20kva 3:3 Phase
No internal battery – Long Backup
Note:
1. The used image is a model image only. The actual product may differ with model image layout, color, size & dimension. No claim will be accepted for image mismatch.
2. The price may be more or less than the mentioned price. Please send a message to the seller for the updated price.
Seller: Orient Computer
Avaiable stock: 5 pc
Sold out: 0 pc
Refund Status: non-Refundable
Warrenty: 12 Months
True on-line
dual conversion design
Generator
Compatible
All
Protections over/low-voltage, overcurrent, overload
Intelligent
Battery Management, extended battery life
Intelligent
Self diagnose function, all kinds of fault protection
Modularized
design of subsystems
Bypass back
feed protection, battery leakage protection
Parallel
Redundancy design, increase the system reliability
Customizable wide input voltage range
Large size the input LCD display on the front panel
Model |
3P20K |
|
Capacity (VA/Watts) |
20K/16K |
|
INPUT |
|
|
Nominal voltage |
380/400/415Vac,
(3Ph+N+PE) |
|
Operating voltage range |
208~478Vac |
|
Operating frequency range |
40 ~ 70Hz |
|
Power factor |
≥0.99 |
|
Harmonic distortion (THD) |
2%(100%
nonlinear load) |
|
Bypass voltage range |
Max. Voltage:
220V +25% (optional +10%, +15%, +20%) 230V 20% (optional +10%, +15%) 240V 15%
(optional +10%), Min voltage: -45% (optional -20%, -30%), Frequency
protection rage: ±10% |
|
Generator input |
Support |
|
OUTPUT |
|
|
Output voltage |
380/400/415Vac,
(3Ph+N+PE) |
|
Voltage regulation |
±1% |
|
Power factor |
0.8/0.9
(Customized) |
|
Output frequency |
1.Line
Mode: ±1%/±2%/±4%/±5%/±10% of the rated frequency (optional) 2.Battery
Mode: (50/60±0.2%)Hz |
|
Crest factor |
3:1 |
|
Harmonic distortion (THDv) |
≤2% with
linear load ≤5% with
non linear load |
|
Efficiency |
94.5% |
|
BATTERY |
|
|
Battery voltage |
Standard
unit: ±216Vdc; Long run unit Optional voltage: ±192V\±204V\±216V\±228V\±240Vdc |
|
Battery type |
12V/38Ah
(standard unit) |
|
Charge Current (A) (charge current can be set according to
battery capacity installed) |
12A
(Max.) |
|
SYSTEM
FEATURES |
|
|
Transfer time |
Utility
to Batter : 0ms; Utility to bypass: 0ms |
|
Overload |
Line Mode |
Load
≤110%: last 60min, ≤125%: last 1min, ≥150% turn to bypass mode immediately |
Bat. Mode |
Load
≤110%: last 10min, ≤125%: last 1min, ≤150%: last 5S, ≥150% shut down UPS
immediately |
|
Short circuit |
Hold
Whole System |
|
Overheat |
Line
Mode: Switch to Bypass; Backup Mode: Shut down UPS immediately |
|
Low battery voltage |
Alarm and
Switch off |
|
Self-diagnostics |
Upon
Power On and Software Control |
|
EPO (optional) |
Shut down
UPS immediately |
|
Battery |
Advanced
Battery Management |
|
Nose Suppression |
Complies
with EN62040-2 |
|
Audible & Visual |
Line
Failure, Battery Low, Overload System Fault |
|
Status LED & LCD display |
Line
Mode, Bypass Mode, Battery Low, Battery Bad, Overload & UPS Fault |
|
Reading on the LCD display |
Input
Voltage, Input Frequency, Output Voltage, Output Frequency, Load Percentage,
Battery Voltage & Inner Temperature |
|
Communication interface |
RS232,
RS485, Parallel, Intelligent slot, Relay card (optional), SNMP card
(optional) |
|
ENCIRONMENTAL |
|
|
Operating temperature |
0~40°C |
|
Storage temperature |
-25 ~ 55°C |
|
Humidity range |
0 ~ 95% (non ─
condensing) |
|
Altitude |
<1500m |
|
Noise level |
<55dB |
|
PHYSICAL |
|
|
Dimension W x D x H (mm) |
780 x 600
x 1200 |
|
Net weight (KG) |
S:602 H:133 |
|
STANDARDS
|
|
|
Safety |
IEC/EN62040-1;
IEC/EN60950-1 |
|
EMC |
IEC/EN602040-2;
IEC61000-4-2: IEC61000-4-3; IEC61000-4-4; IEC61000-4-5;
IEC61000-4-6; IEC 61000-4-8 |